ZeroEdge Z-Edge Z3 Dashboard Camera Review

zeroedge-z-edge-z3

ZeroEdge Z-Edge Z3 Technical specifications

Product TypeZ-Edge Z3Max. Resolution1296P
ReliabilityGoodVideo Quality (day/night)Good/Good
PriceCheck Latest PricePhoto resolutionup to 13MP
Read Reviews740+ Customer ReviewsSize (mm)90 x 55 x 40mm
HDR Super Night VisionYesViewing Angle 145°
Screen3″ Max. Card Size64GB(free 32GB)

The camera comes with 34” microUSB data cable, 32GB misroSD card, a suction cup mount, 12.5′ miniUSB power-cable, 4 sticky cable guides, and double USB cigarette lighter car battery charger.

The camera for the unit can record HD video at 2K and 720p, 1080p at 45 30, or 60 frames per second and includes a 145 degree wide angle lens. For viewing the video, along the leading you’ve the microUSB receiving port, A1/4″ installing pit for that suction cup and result A/V interface. The LCD screen is 3” about the sides you’ve the controls and by 1.75”. The microSD card gets inserted under a rubber door in the bottom. Ensure the gold contacts are placed initially, dealing with the LCD. There is a battery while the car is running, in this unit that will charge. The battery doesn’t last long, though once unplugged from the power. Perhaps 15 to 25 minutes depending upon for how long the LCD remains on. This is really excusable for other cameras and a dashboard camera I’ve utilized last 10 minutes or less.

The suction cup bracket just screws to the hole towards the top so you can position the way you want to it, and the camera swivels on the ball joint. You turn on the car and once the unit is connected to the cigarette lighter port, the camera will launch immediately and can be set to start tape-recording immediately. The leading right button will be the one touch microphone mute button on/off on the fly for personal privacy, so you can switch the mic.

The settings menus were simple to browse and simple. The camera performs best when the card is above and class 6 and can accept cards up to 64GB. At the highest resolution, on a 32 GB card you’ll have the ability to tape-report about 280 minutes of footage, and the oldest footage will be over written by the camera until the footage is “closed” which may be done through various detection modes or manually. Using the G-shock sensor is on, once the camera spots bumps that it believes is a crash or mishap, it prevent it from being overwritten and will lock the recording. The G-shock sensitivity could be set to low-medium or large. I see the number of occasions it captures and usually start in high mode and bump the sensitivity down as required so I do not have a lot of “closed” movies.

The motion detection environment can immediately begin tape-recording footage once the camera is on and it spots movement. It then stop unless the motion continues and will record 20 seconds. In battery power and record, it will switch on in parking tracking function, following the camera is turned off, if it spots a slight vibration, like from the ball for your car for 25 seconds. So you can take pictures and playback mode for both videos and photos there’s likewise a still camera mode; the camera includes a speaker to help you hear audio throughout play.

The video quality of the tracks is excellent. Not just can you check out license plate numbers within a couple of car lengths, however the wide-angle catches both sides of the roadway well. You can read road signs and even in the evening the video is clear and see the roadway in low light conditions. The audio is relatively clear and choices up noise in your car quite well, however you do get a fair bit of road noise that makes things a bit stifled. At 1 minute periods and each 1080p file uses up about 100 MB and 2K files use up about 150 MB. In general, the camera captures enough information to see exactly what’s going on in the roadway in case of a mishap in hi-res video. It was easy to setup, simple to utilize, and it was simple to recover the video recordings by eliminating the card and utilizing a card reader or plugging it straight into the computer system through the microUSB cable.

The motion detection setting will immediately begin tape-recording footage when the video camera is on and it spots movement. It then stop unless the motion continues and will record 20 seconds. In battery power and record, it will switch on in parking monitoring mode, after the video camera is turned off, if it spots a slight vibration, like from the bump for your vehicle for 25 seconds. To help you take pictures and playback mode for both videos and photos there’s likewise a still camera mode; the video camera includes a speaker to help you hear audio throughout play.

The video quality of the tracks is excellent. Not just can you check out license plate numbers within a couple of car lengths, however the wide-angle catches both sides of the roadway well. You can read road signs and even in the evening the video is clear and see the roadway in low light conditions. The audio is relatively clear and choices up sound in your vehicle quite well, however you do get a fair bit of road noise that makes things a bit stifled. AT 1 second times and each 1080p document uses up about 100 MB and 2K files use up about 150 MB. In general, the video camera captures enough information to see exactly what’s going on in the roadway in case of a mishap in hi-res video. It was easy to setup, simple to utilize, and it was simple to recover the video recordings by eliminating the card and utilizing a card reader or plugging it straight into the computer system through the microUSB cable.

ZeroEdge Z-Edge Z3 Car Dashcam Video Sample

 

 

where to buy?

You can have ZeroEdge Z-Edge Z3 Car Dashcam Dash Camera from the Amazon links:

Amazon US

Amazon Customer Reviews

 

* If you like this dash cam review, please share! Thank You So Much!